Arrêtez tout. Désinstallez les scripts Pré-alarme incendie , Alarme augmentation température V2 , Alarme température et hygrométrie v3 , notification dispositifs actifs , ils ne servent plus à rien.fait le café vous permet d’éteindre les dispositifs actifs après un délai d’inactivité du device et/ou d’un device tiers (comme un détecteur de mouvement ou capteur de porte)fonction de notification universelle présenté précédemment.
Les fonctionnalités du script original, créé par rrozema, sont :
le script complet
--[[
original script by rrozema Generic auto-off : https://www.domoticz.com/forum/viewtopic.php?f=72&t=23717&p=205159&hilit=auto+off#p201976
author = papoo
maj : 04/03/2019
this version need a waaren script, Universal function notification :
https://www.domoticz.com/forum/viewtopic.php?f=59&t=26542#p204958
https://pon.fr/dzvents-fonction-de-notification-universelle/
blog url : https://pon.fr/dzvents-script-de-notification-ultime-mais-pas-que
github url : https://github.com/papo-o/domoticz_scripts/blob/master/dzVents/scripts/JsonDescription.lua
This script will run every minute and can automatically send an 'Off' command to turn off any device after
it has been on for some specified time. Each device can be individually configured by putting json coded
settings into the device's description field. The settings currently supported are:
- "auto_off_minutes" :
- "auto_off_motion_device" : ""
If "auto_off_minutes" is not set, the device will never be turned off by this script. If
"auto_off_minutes" is set and is a valid number, the device will be turned off when it
is found to be on plus the device's lastUpdate is at least minutes old. This behavior
can be further modified by specifying a valid device name after "auto_off_motion_device". When a motion
device is specified and the device's lastUpdate is at least old, the device will not
be turned off until the motion device is off and it's lastUpdate is also old.
Specifying "auto_off_motion_device" without specifying "auto_off_minutes" does nothing.
Example 1: turn off the device after 2 minutes:
{
"auto_off_minutes": 2
}
Example 2: turn off the device when it has been on for 5 minutes and no motion has been detected by
the "Overloop: Motion" device:
{
"auto_off_minutes": 5,
"auto_off_motion_device": "Overloop: Motion"
}
Example 3: turn off the device when it has been on for 2 minutes and no motion has been detected by
either of the "Overloop: Motion" or the "Trap: Motion" devices:
{
"auto_off_minutes": 2,
"auto_off_motion_device": {"Overloop: Motion", "Trap: Motion"}
}
With this new version you can :
- be notified if temperature and or hygrometry exceed min or max threshold.
- be notified if device is on, off or out
you can mix the desired notifications, such as only the maximum temperature rise,
or the minimum and maximum humidity, or do not set quiet hours, or minimum temperature and timout
if you want to use the notification functions, the frequency of notifications is necessary
Avec cette nouvelle version vous pouvez :
- être averti après le délai défini si la température et / ou l'hygrométrie dépassent le seuil minimal ou maximal.
- être averti si l'appareil est allumé, éteint ou éteint hors service
vous pouvez mélanger les notifications souhaitées, telles que uniquement le dépassement de température maxi,
ou l'hygrométrie mini et maxi, ou ne pas définir d'heures calmes, ou température mini et timeout
si vous souhaitez utiliser les fonctions de notification, la fréquence de notifications est nécessaire
Example 4 : be notified if temperature or hygrometry exceed min or max threshold
with notifications frequency in minutes and quiet hours notification
{
"low_threshold_temp": 10,
"high_threshold_temp": 40,
"low_threshold_hr": 25,
"high_threshold_hr": 75,
"frequency_notifications": 60,
"quiet_hours":"23:00-07:15"
}
Example 5 : be notified if device is on since x minutes
with notifications frequency in minutes and quiet hours notification
{
"time_active_notification": 120,
"frequency_notifications": 60,
"quiet_hours":"23:00-07:15"
}
Example 6 : be notified if device is off since x minutes
with notifications frequency in minutes and quiet hours notification
{
"time_inactive_notification": 2,
"frequency_notifications": 60,
"quiet_hours":"23:00-07:15"
}
Example 7 : be notified if device is out since x minutes
with notifications frequency in minutes and quiet hours notification
{
"timeout_notification": 1440,
"frequency_notifications": 60,
"quiet_hours":"23:00-07:15"
}
--]]
local scriptName = 'Json Description'
local scriptVersion = '0.7'
return {
active = true,
on = {
-- timer triggers
timer = {
'every minute'
}
},
-- custom logging level for this script
logging = {
level = domoticz.LOG_DEBUG,
-- level = domoticz.LOG_INFO, -- Seulement un niveau peut être actif; commenter les autres
-- level = domoticz.LOG_ERROR, -- Only one level can be active; comment others
-- level = domoticz.LOG_MODULE_EXEC_INFO,
marker = scriptName..' v'..scriptVersion
},
execute = function(domoticz, triggeredItem, info)
local cnt = 0
local SubSystem = {
-- table with one or more notification systems.
-- uncomment the notification systems that you want to be used
-- Can be one or more of
-- domoticz.NSS_GOOGLE_CLOUD_MESSAGING,
-- domoticz.NSS_PUSHOVER,
-- domoticz.NSS_HTTP,
-- domoticz.NSS_KODI,
-- domoticz.NSS_LOGITECH_MEDIASERVER,
-- domoticz.NSS_NMA,
-- domoticz.NSS_PROWL,
-- domoticz.NSS_PUSHALOT,
--domoticz.NSS_PUSHBULLET,
-- domoticz.NSS_PUSHOVER,
-- domoticz.NSS_PUSHSAFER,
domoticz.NSS_TELEGRAM,
}
local subject = "/!\\ Attention /!\\" -- sujet des notifications
domoticz.devices().forEach(
function(device)
cnt = cnt + 1
local frequency_notifications = nil
local quiet_hours = nil
local message = nil
--domoticz.log( 'Device "' .. device.name .. '" is "' .. tostring(device.state) .. '".', domoticz.LOG_INFO)
--if device.state ~= 'Off' or device.temperature ~= nil or device.humidity ~= nil or device.state~= 'Close' then
local description = device.description
if description ~= nil and description ~= '' then
--domoticz.log( 'description = ' .. description .. '.', domoticz.LOG_INFO)
local ok, settings = pcall( domoticz.utils.fromJSON, description)
if ok and settings ~= nil then
-- fréquence de notification
if settings.frequency_notifications ~= nil then
frequency_notifications = settings.frequency_notifications
domoticz.log('la fréquence de notification pour '.. device.name .. ' est de ' .. settings.frequency_notifications.." minutes", domoticz.LOG_INFO)
end
-- période silencieuse
if settings.quiet_hours ~= nil then
quiet_hours = settings.quiet_hours
domoticz.log('la période silencieuse de notification pour '.. device.name .. ' est fixée à ' .. quiet_hours, domoticz.LOG_INFO)
end
-- Alarme dispositif injoignable
if settings.timeout_notification and device.timedOut then
domoticz.log(device.name .. ' est injoignable. Sa dernière activité remonte à ' .. device.lastUpdate.minutesAgo .. ' minutes.', domoticz.LOG_INFO)
message = device.name .. ' est injoignable depuis '.. settings.timeout_notification ..' minutes'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
if device.state == 'Off' or device.state == 'Close' then
-- Alarme dispositif inactif
domoticz.log(device.name .. ' est à l\'état ' .. device.state, domoticz.LOG_INFO)
if settings.time_inactive_notification ~= nil and device.lastUpdate.minutesAgo >= settings.time_inactive_notification then
domoticz.log(device.name .. ' est inactif depuis ' .. device.lastUpdate.minutesAgo .. ' minutes. Le délai est fixé à '.. settings.time_inactive_notification.. ' minutes.', domoticz.LOG_INFO)
message = 'Le délai d\'inactivité fixé à '.. settings.time_inactive_notification .. ' minutes pour '.. device.name .. ' est dépassé'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
elseif device.temperature ~= nil or device.humidity ~= nil then
-- Alarme température
if device.temperature ~= nil and (settings.low_threshold_temp ~= nil or settings.high_threshold_temp ~= nil) then
domoticz.log('La température mesurée par '.. device.name .. ' est de ' .. tostring(domoticz.utils.round(device.temperature, 1)) ..'°C', domoticz.LOG_INFO)
if settings.low_threshold_temp ~= nil and device.temperature < settings.low_threshold_temp then -- seuil bas température
domoticz.log(device.name .. ' a un seuil temperature basse défini à ' .. settings.low_threshold_temp..'°C', domoticz.LOG_INFO)
message = 'La température mesurée par '.. device.name .. ' est inférieure au seuil défini ('..settings.low_threshold_temp..'°C)'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
if settings.high_threshold_temp ~= nil and device.temperature > settings.high_threshold_temp then -- seuil haut température
domoticz.log(device.name .. ' a un seuil temperature haute défini à ' .. settings.high_threshold_temp..'°C', domoticz.LOG_INFO)
message = 'La température mesurée par '.. device.name ..' est supérieure au seuil défini ('..settings.high_threshold_temp..'°C)'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
end
-- alarme hygrométrie
if device.humidity ~= nil and (settings.low_threshold_hr ~= nil or settings.high_threshold_hr) then
domoticz.log('L\'hygrometrie mesurée par '.. device.name .. ' est de ' .. tostring(device.humidity)..'%hr', domoticz.LOG_INFO)
if settings.low_threshold_hr ~= nil and device.humidity < settings.low_threshold_hr then -- seuil bas hygrométrie
domoticz.log(device.name .. ' a un seuil hygrometrie bassse défini à ' .. settings.low_threshold_hr..'%hr', domoticz.LOG_INFO)
message = 'L\'humidité mesurée par '.. device.name .. ' est inférieure au seuil défini ('..settings.low_threshold_hr..'%hr)'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
if settings.high_threshold_hr and device.humidity > settings.high_threshold_hr then -- seuil haut hygrométrie
domoticz.log(device.name .. ' a un seuil hygrometrie haute défini à ' .. settings.high_threshold_hr..'%hr', domoticz.LOG_INFO)
message = 'L\'humidité mesurée par '.. device.name .. ' est supérieure au seuil défini ('..settings.high_threshold_hr..'%hr)'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
end
elseif device.state == 'On' or device.state == 'Open' then
-- Alarme dispositif actif
domoticz.log(device.name .. ' est à l\'état ' .. device.state, domoticz.LOG_INFO)
if settings.time_active_notification ~= nil and device.lastUpdate.minutesAgo >= settings.time_active_notification then
domoticz.log(device.name .. ' est actif depuis ' .. device.lastUpdate.minutesAgo .. ' minutes. Le délai est fixé à '.. settings.time_active_notification.. ' minutes.', domoticz.LOG_INFO)
message = 'Le délai fixé à '.. settings.time_active_notification .. ' minutes pour '.. device.name .. ' est dépassé'
domoticz.helpers.managedNotify(domoticz, subject, message, SubSystem, frequency_notifications , quiet_hours)
end
-- auto off
if settings.auto_off_minutes ~= nil and device.lastUpdate.minutesAgo >= settings.auto_off_minutes then
if settings.auto_off_motion_device == nil then
domoticz.log(device.name .. ' is switched off because it has been on for ' .. settings.auto_off_minutes .. ' minutes.', domoticz.LOG_INFO)
device.switchOff()
elseif type(settings.auto_off_motion_device) == "string" then
local motion_device = domoticz.devices(settings.auto_off_motion_device)
if motion_device.state == 'Off' then
domoticz.log(device.name .. ' is switched off because no one was in the room for ' .. settings.auto_off_minutes .. ' minutes.', domoticz.LOG_INFO)
device.switchOff()
end
elseif type(settings.auto_off_motion_device) == "table" then
local off = true
for i,v in ipairs(settings.auto_off_motion_device) do
if domoticz.devices(v).state ~= 'Off' then
off = false
end
end
if off then
domoticz.log(device.name .. ' is switched off because no one was in the room for ' .. settings.auto_off_minutes .. ' minutes.', domoticz.LOG_INFO)
device.switchOff()
end
end
end
end
else
domoticz.log( 'Device description for '.. device.name ..' is not in json format. Ignoring this device.', domoticz.LOG_ERROR)
end
domoticz.log('--------------------------------------------------------------------------------------------------', domoticz.LOG_INFO)
end
--end
end
)
domoticz.log('Scanned ' .. tostring(cnt) .. ' devices.', domoticz.LOG_INFO)
end
}
retrouver la dernière version de ce script sur
Site Officiel :
github.com
